Instructions / Assembly

6
Step 3
Remove screw from each burner "foot"
using a screwdriver. Carefully lift each
burner up and away from valve openings.
Set aside for later use.
Step 4
Use the gas orifice tool to remove the LP
brass orifice from main burner valves
through the hole on the firebox front
panel. Repeat this step for all main
burners in your grill.
Note: All orifices of the grill are double
orifices type (LP gas and natural
gas). You only remove the LP
gas orifice tip.
CAUTION: Some parts may contain
sharp edges. Wear protective gloves if
necessary.
Step 5
Remove all the control knobs from the
control panel and set aside for later use.
LP Gas Orifice
Gas Orifice Tool
Side View
Firebox Front Panel