INSTR-SM SL-7.
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 2 HOW YOUR HOME SECURITY MOTION ACTIVATED LIGHTING SYSTEM WORKS TEMPLATE The Home Security Motion Activated Lighting System is designed to turn on automatically at night when a person enters the detection zone. The light will stay on as long as the motion detector senses motion in the zone. The light will turn off in approximately 90 seconds after the person leaves the detection zone or stops moving.
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 3 ASSEMBLY INSTRUCTIONS HOME SECURITY ACCESSORIES Inspect contents of the box to ensure all parts are included and undamaged. 3 For Visa/MasterCard orders, please call 1-800-468-5252, Monday through Friday, 8:30 AM - 5:00 PM Central Standard Time. 100-0057-0 Replacement Bulb 070-6001-0 SL-7 Replacement Battery 112-0010-0 15 ft. Extension Cord 4 A Phillips screwdriver will be required.
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 4 b. If the weather has been cloudy or overcast during the day, the battery will not be charged for operation at night. The light must have direct sunlight every day to fully charge the battery. If the light does not receive enough sunlight one day, it will recharge the next sunny day and resume normal operation. Step 3 Slide the two slots in the back of main housing onto the screws.
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 5 Cleaning It is important that the solar panel is kept free of dirt and debris. A dirty solar panel will not allow the battery to fully charge. This will shorten the life of the battery and cause the light to malfunction. Clean regularly with a dampened cloth or paper towel. Storage Solar security lights can be left outside year round, even in cold weather.
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 6 TESTING INSTRUCTIONS Changing Bulb Step 1 1. Turn lens counterclockwise and remove. Bulb After installing your light, leave the switch in the “OFF” position and charge in full, direct sunlight for THREE FULL SUNNY DAYS. Lens Step 2 2. Pull bulb straight out and replace with new bulb. DO NOT PLACE NEW BULB IN BRASS GROMMET HOLES. 3. Replace the lens by aligning the slots with the grooves in the top housing and turning clockwise to lock in place.
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 6 TESTING INSTRUCTIONS Changing Bulb Step 1 1. Turn lens counterclockwise and remove. Bulb After installing your light, leave the switch in the “OFF” position and charge in full, direct sunlight for THREE FULL SUNNY DAYS. Lens Step 2 2. Pull bulb straight out and replace with new bulb. DO NOT PLACE NEW BULB IN BRASS GROMMET HOLES. 3. Replace the lens by aligning the slots with the grooves in the top housing and turning clockwise to lock in place.
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 5 Cleaning It is important that the solar panel is kept free of dirt and debris. A dirty solar panel will not allow the battery to fully charge. This will shorten the life of the battery and cause the light to malfunction. Clean regularly with a dampened cloth or paper towel. Storage Solar security lights can be left outside year round, even in cold weather.
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 4 b. If the weather has been cloudy or overcast during the day, the battery will not be charged for operation at night. The light must have direct sunlight every day to fully charge the battery. If the light does not receive enough sunlight one day, it will recharge the next sunny day and resume normal operation. Step 3 Slide the two slots in the back of main housing onto the screws.
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 2 HOW YOUR HOME SECURITY MOTION ACTIVATED LIGHTING SYSTEM WORKS TEMPLATE The Home Security Motion Activated Lighting System is designed to turn on automatically at night when a person enters the detection zone. The light will stay on as long as the motion detector senses motion in the zone. The light will turn off in approximately 90 seconds after the person leaves the detection zone or stops moving.
INSTR-SM SL-7.
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 3 ASSEMBLY INSTRUCTIONS HOME SECURITY ACCESSORIES Inspect contents of the box to ensure all parts are included and undamaged. 3 For Visa/MasterCard orders, please call 1-800-468-5252, Monday through Friday, 8:30 AM - 5:00 PM Central Standard Time. 100-0057-0 Replacement Bulb 070-6001-0 SL-7 Replacement Battery 112-0010-0 15 ft. Extension Cord 4 A Phillips screwdriver will be required.
