MSDS

Material
Safety Data Sheet
LITHIUM BATTERY
MSDS No.:AJT110930006E
Issue date: 2011-09-30 Page 3 of 6
edema.
Special protective equipment:
Use self-contained breathing apparatus to avoid breathing irritant fumes.
Wear protective clothing and equipment to prevent body contact with electrolyte solution.
6. ACCIDENTAL RELEASE MEASURES
The material contained within the batteries would only be expelled under abusive conditions.
Soak under water or spray with copious amounts of water, place in approved container (after cooling if necessary) and
dispose in accordance with local regulations.
7. HANDLING AND STORAGE
The batteries should not be opened, destroyed nor incinerate since they may leak or rupture and release in the
environment the ingredients they contain.
Handling: Do not crush, pierce, short (+) and (-) battery terminals with conductive (i.e. metal) goods. Do not directly
heat or solder. Do not throw into fire. Do not mix batteries of different types and brands. Do not mix new and used
batteries. Keep batteries in non-conductive (i.e. plastic) trays.
Storage: Store in a cool (preferably below 30°C) and ventilated area away from moisture, sources of heat, open
flames, food and drink. Keep adequate clearance between walls and batteries. Temperature above 70°C may result in
battery leakage and rupture. Since short circuit can cause burn, leakage and rupture hazard, keep batteries in original
packaging until use and do not jumble them.
Other: Follow manufacturer recommendations regarding maximum recommended currents and operating temperature
range.
Applying pressure or deforming the battery may lead to disassembly followed by eye, skin and throat irritation.
8. EXPOSURE CONTROLS, PERSONAL PROTECTION
Respiratory protection: Not necessary under normal use. In case of battery rupture, use self- contained full-face
respiratory equipment.
Hand protection: Not necessary under normal use. Use Viton rubber gloves if handling a leaking battery.
Eye protection: Not necessary under normal use. Wear safety goggles or glasses with side shields if handling a
leaking or ruptured battery.
Skin protection: Not necessary under normal use. Use rubber apron and protective working in case of handling of a
ruptured battery
9. PHYSICAL AND CHEMICAL PROPERTIES