Brinly-Hardy Co.
CONGRATULATIONS on your purchase of this Brinly Attachment. It has been designed, enqlneered, and manufactured to give you the best possible dependability and performance. Please read and retain this manual. The instructions will enable you to assemble and maintain your Attachment properly. Always observe the uSAFETY RULES II • Should the need ever exist for repair parts, order through most any Lawn and. Garden dealer, using part number and description. RULES FOR SAFE OPERATION ..
F CARl TE QU LITY FY U ~ About the Company with quality productsfrom BRINLY·HARDYC MPANY For generations, Brinly-Hardy has been serving the growing needs of farmers, gardeners, lawn professionals, andhomeowners. OUf first plow was introduced in 1839 andeversince, wehavebeenforging a name in theproduction of quality-crafted farm, lawn, turf, andgarden tools. It's a proudheritage, one you can trustin caring for your lawn. j Aerator Spreaders You can actually handle two jobs at once with our Aeratcr.
ASS;EMI3LY f\JOTE: Before starting assembly, separate each kind of hardware into a group for ease of assembly. NOTE: Right Hand (R.H.) and Left Hand (L:H.) are determined from the OPERATOR'S position while seated TO ASSEMBLE YOUR DISKH·ARROW, YOU WILL NEED: 11 2 - 1-1/8 wrenches or 2 - 10" Adjustable Wrenches on tractor. 11 1 - 9/16 Wrench 2 -.3/4 Wrench 1 - Pair of.
Refer to Fig. 3 • Determine your requirements for Disk Angling and Spacing. (Refer to Fig. 6 & 7) Disk Gang Angles are adjustable for 10, 15, & 20 degree Angles. The 15 degree position (center of the Adjusting Slot in Disk Hanger) is recommended to start. The 10 and 20 degree Angles 'are for less aggressive or more aggressive Disking Action.
iff &Mi Refer to Fig. 5 \I For tractors equipped with sleeve hitch, refer to operator's manual on your hitch for any hitch pre- adjustment instructions. • Remove stabilizer bolts from your ~itch.Disk .Harrow should be free to move side to side on hitch. • ' Mount the Disk Harrow to the sleeve hitch, with hitch pin. Disking breaks down large clods of plowed dirt, preparing a smooth seed bed. Depending on ground conditions, several passes may be required.
CUSTOMER RESPONSIBILITY .. Frequently inspect all fasteners - they must be tight! • Lubricate the disk bearings through grease fittings (7), shown on the parts list, before each disking operation and at four-hour intervals during use. NOTE: When lubrtcatlnq bearings, it is recommended that you use automotive-type chasis lube.
Inlnl_lii~ __ 00-551 DISK lS-y l1rO'I_ir"'l!&tII\"""lIl\'lLAI! ~1 .--24 8-20 -e. I 21 PARTS LIST Ref. No:: Part. No. 1 *4 5 6 7 8 9 10 11 12 13 14 15 17 18 19 20 21 .: 22 23 24 25 28 8-5925 0-121 D-122P-01 . 0-126-10 D-128P 45M2525P D-144P 12 10M1620P 1M1624P 10M1216P B-1677P 30M1200P 30M1600P 30M2400P 31M2400P 40M1·200P 40M1600P 45M1313P 0-279 Disk Bearing D-283-10 D-181A 0-281-10 L-1521-BH -1 Qty.
