Replacement Part List

3English Manual 1018671-A
================================================================================================
HARDWARE IDENTIFIER
TEAR OUT THIS PAGE
Illustrations on this page are to-scale for identication of hardware during assembly. Tear out this page for quick reference.
Simply lay the hardware directly on top of the illustrations below to verify you’re using the correct parts.
10
Bushing: Hex Head
3/8” x 1/2" (x2). . . . . . . . . . . . . . .
1001301
Exterior circumferences of the washers can
vary. These dimensions are a measurement of
the internal diameter of the washer.
14
Washer: Flat
3/8” (x2) . . . . . . . . . . . . . . .
45M1313P
15
Washer: Lock
5/16” (x14) . . . . . . . . . . . . . . .
40M1000P
16
Washer: Flat
5/16” (x8) . . . . . . . . . . . . . . . .
45M1111P
12
Nut: Nylon Lock
5/16” (x2) . . . . . . . . . . . . . . . . . . .
B-4786
13
Nut: Hex Head
5/16” (x14) . . . . . . . . . . . . . . . . . .
30M1000P
Bolt: Carriage
5/16 x 1” (x8) . . . . . . .
11M1016P
18
Screw:
Round Head
5/16 x 1” (x8) . . . . . . .
20M1020P
20
Bolt: Hex Head
3/8 x 1 1/4”
(x2) . . . . . . . . . . . . .
2M1220P
19
17
Spring
(x1) . . . .
B-6300
11
Nut: Nylon Lock
3/8” (x4) . . . . . . . . . . . . . . . . . . .
B-4820
Bolt: Hex Head 3/8 x 3” (x2) . . . . . . . . . . . . . . .
2M1248P
21
Grip: Flat
( for Handle )
(x1) . . . . . . . . . . . . . . . . . . . . . . . . . .
R-1882
22
Drill Bit (x1) . . . . . . . . . . . . .
1018992
23