Use and Care Manual
================================================================================================
L-1762-F16
STEP 2-A
------------------------------
Align the Side Plates (5) with Tray
(6) as illustrated here.
Find this hardware:
- x8 Hex Bolts (20) - 5/16” x 3/4”
- x8 Flat Washers (24) - 5/16”
- x8 Nylon Lock Nuts (32) - 5/16”
Add a at washer (24) to each of the
hex bolts (20). From the inside of
the tray, insert the bolt and washer
assembly.
Secure each bolt with a Nylon Lock
Nut (32) on the outside edges of the
tray and plates.
32
32
20
20
24
24
24
24
24
6
5
5
32
20
20
32
ASSEMBLY: 48” Plug Aerator
(
PA-48 BH
)
Align the Mounting Brackets (31)
to the outside of Tow Bars (7).
Find this hardware:
- x4 Hex Bolts (8) - 5/16” x 1”
- x4 Flat Washers (24) - 5/16”
- x4 Nylon Lock Nuts (32) - 5/16”
STEP 2-B
------------------------------
24
8
8
24
24
8
8
24
31
31
7
7
32
32
hex bolts (8). Insert the Bolt and Washer Assembly from outside of the Mount Bracket.
Start to add Nylon Lock Nuts (32) to the end of each hex bolt, however, DO NOT tighten fully (yet).
IMPORTANT - When tightening the bolts,
maintain a specic distance of inside of the side
plates (5): 48” to 48-1/8”
5
5
48” to 48-1/8”
Add a at washer (24) to each of the