Use and Care Manual

================================================================================================
L-1762-F17
IMPORTANT:
Side of the tray with
labels faces forward.
ASSEMBLY: 48” Plug Aerator
(
PA-48 BH
)
STEP 3
------------------------------
Assemble Mount Brackets (31)
to Tray (6) as shown.
Find this hardware:
- x7 Hex Bolts (20) - 5/16” x 0.75”
- x7 Nylon Lock Nuts (32) - 5/16”
Align the Center Plate (33) with
Tray (6) as shown. Insert three Hex
Bolts (20) through the top of the Tray.
Loosely hold in place with
three Lock Nuts (32).
Insert the Bolts (20) from the topside of
the Tray. DO NOT tighten fully (yet), but
secure with four Nylon Lock Nuts (32).
32
32
20
20
20
32
6
33
31
31
32
32
32
21
32
29
29
21
7
7
STEP 4
------------------------------
21
32
29
29
21
7
7
A. Assemble the clevis (2) to the tow
bars (7) as shown.
Hold in place with:
- x2 Carriage Bolts (29) - 5/16” x 2.25”
- x2 Nylon Lock Nuts (32) - 5/16”
DO NOT tighten fully (yet).
B. Next, secure the tow bars (7)
in place with:
- x1 Hex Head Bolts (21) - 5/16” x 1.25”
- x1 Nylon Lock Nuts (32) - 5/16”
DO NOT tighten fully (yet).
2
2
7
7
29
29
32
32
Hex Bolt (21) goes between the
two Carriage Bolts (29).
A
B