Use and Care Manual

================================================================================================
L-1762-F5
Bolt: Hex Head,
5/8 x 4” . . . . . . . . . . . . . . . . . . .
22
2M2064P
Nut: Hex Lock: 5/16” . . . . . . . . .
28
B-1674P
Nut: Hex Lock: 5/8” . . . . . .
30
30M2000P
Carriage Bolt:
5/16 x 2 1/4” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
11M1036P
TEAR OUT THIS PAGE
PART IDENTIFIER
Illustrations on this page are to-scale for
faster identication of hardware during assembly.
Tear out this page for quick reference.
Simply lay the hardware directly on top
of the illustrations below to verify you’re
using the correct parts.
Exterior circumferences of washers
can vary. These dimensions are
a measurement of the internal
diameter of the washer.
Washer:
Flat
5/8” . . . . . . . .
45M2121P
25
Washer: Flat
5/16” . . . . . . . . . . . . .
45M1111P
24
Washer: Lock
5/8” . . . . . . . . . . .
40M2000P
23
Bushing
3/4” . . . . . . . . . . .
B-676P
26
Bolt: Hex Head,
5/16 x 1” . . . . . . . . . . . . . .
8
2M1016P
Bolt: Hex Head,
5/16 x 3/4” . . . . . . . . . . . . . . . .
20
2M1012P
2M1020P
Bolt: Hex Head,
5/16 x 1 1/4” . . . . . . . .
21
Bolt: Hex Head,
5/16 x 1 1/2” . . . . .
19
2M1024P
B-3307-S
Transport Lock Pin . . . . .
27
Nut: Nylon Lock: 5/16” . . . . . . .
32
B-4786