Use and Care Manual

L-1762-F7
If you are assembling the 48” model (PA-48 BH), please skip to page 15 of this manual.
Not sure which model you have? Page 4 will clear up any confusion.
================================================================================================
ASSEMBLY: 40” Plug Aerator
(
PA-40 BH
)
STEP 1
--------------------------------------
Tear out the Part Identier (pages 5-6)
for a faster assembly process. Organize
your hardware and verify that you are, in fact,
assembling the PA-40 BH.
See page 27 for a complete index of parts.
If you have installation questions, are
missing parts or need replacement parts,
don’t go back to the store! Please contact
our Customer Service department:
Call, Toll-Free: 877-728-8224
Chat online: www.brinly.com
Email: [e-mail]
REQUIRED TOOLS
FOR ASSEMBLY
- - - - - - - - - - - - - - - - - - - - -
• 7/16” Wrench
• 7/16” Socket & Ratchet
• 9/16” Wrench
• 9/16” Socket & Ratchet
• 1/2” Socket & Ratchet
• Pliers
• Gloves
6
L-1762-F
================================================================================================
15
15
13
12
15
9
5
33
10
16
14
11
6
2
7
31
PA-40BH
PA-48BH
REF DESCRIPTION PART NO. QTY PART NO. QTY
2 Clevis R- 89 2-10 2 R- 89 2-10 2
5 Side Plate B- 4851-10 2 B -49 01-10 2
6 Tray With Labels B-6173-BH 1 B-6257-BH 1
7 Tow Ba r B- 6259 -10 2 B -6 25 9-10 2
9 Plugging Spoon B-4855-10 24 B-4855-10 32
10 Axle Assembly B-5700-10 1 B-5702-10 1
11 Lif t Handle Assembly B-5698-10 1 B-5698-10 1
12 End Tube Assembly B-5309-10 2 B -48 62-10 2
13 Center Tube Assembly B-5311-10 1 B-4865-10 2
14 Handle Grip B-4 867 1 B-4 867 1
15 3/4" Nylon Bearing B-4866 6 B-4866 8
16 Transport Wheel B- 6174 2 B -6174 2
31 Mount Bracket B- 6171-10 2 B -625 8 -10 2
33 Center Plate N/A N/A B- 4902 -10 1
PART IDENTIFIER
See pages 26-27 for a complete diagram and index of all parts.
5
L-1762-F
================================================================================================
Bolt: Hex Head,
5/8 x 4” . . . . . . . . . . . . . . . . . . .
22
2M2064P
Nut: Nylon Lock: 5/16” . . . . . . .
32
B- 4786
Nut: Hex Lock: 5/16” . . . . . . . . .
28
B-1674P
Nut: Hex Lock: 5/8” . . . . . .
30
30M2000P
Carriage Bolt:
5/16 x 2 1/4” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
11M1 03 6P
TEAR OUT THIS PAGE
PART IDENTIFIER
Illustrations on this page are to-scale for
faster identication of hardware during assembly.
Tear out this page for quick reference.
Simply lay the hardware directly on top
of the illustrations below to verify you’re
using the correct parts.
Exterior circumferences of washers
can vary. These dimensions are
a measurement of the internal
diameter of the washer.
Washer:
Flat
5/8” . . . . . . . .
45M2121P
25
Washer: Flat
5/16” . . . . . . . . . . . . .
45 M1111P
24
Washer: Lock
5/8” . . . . . . . . . . .
40M2000P
23
Bushing
3/4” . . . . . . . . . . .
B- 676P
26
Bolt: Hex Head,
5/16 x 1” . . . . . . . . . . . . . .
8
2M1016 P
Bolt: Hex Head,
5/16 x 3/4” . . . . . . . . . . . . . . . .
20
2M1012P
2M1020P
Bolt: Hex Head,
5/16 x 1 1/4” . . . . . . . .
21
Bolt: Hex Head,
5/16 x 1 1/2” . . . . .
19
2M1024P
B- 3307-S
Transport Lock Pin . . . . .
27
Additional info and videos
are available on our website:
www.brinly.com
(OR scan this QR code)