Use and Care Manual

================================================================================================
L-1762-F8
ASSEMBLY: 40” Plug Aerator
(
PA-40 BH
)
STEP 2-A
--------------------------
Align the Side Plates (5) with Tray
(6) as illustrated here.
Find this hardware:
- x8 Hex Bolts (20) - 5/16” x 3/4”
- x8 Flat Washers (24) - 5/16”
- x8 Nylon Lock Nuts (32) - 5/16”
Add a at washer (24) to each of the
hex bolts (20). From the inside of
the tray, insert the bolt and washer
assembly.
Secure each bolt with a Nylon Lock
Nut (32) on the outside edges of the
tray and plates.
32
32
20
20
24
24
24
24
24
6
5
5
32
20
20
32
STEP 2-B
--------------------------
24
8
8
24
24
8
8
24
31
31
7
7
32
32
Align the Mounting Brackets (31)
to the outside of Tow Bars (7).
Find this hardware:
- x4 Hex Bolts (8) - 5/16” x 1”
- x4 Flat Washers (24) - 5/16”
- x4 Nylon Lock Nuts (32) - 5/16”
the hex bolts (8). Insert the Bolt and Washer Assembly from outside of the Mount Bracket.
Start to add Nylon Lock Nuts (32) to the end of each hex bolt, however, DO NOT tighten fully (yet).
Add a at washer (24) to each of
IMPORTANT - When tightening the bolts,
maintain a specic distance of inside of the side
plates (5): 41” to 41-1/8”
5
5
41” to 41-1/8”