Instructions / Assembly

10 1019100-C

English Manual

================================================================================================

ASSEMBLY

2616

Step 3-C

Position one

or two washers (16 or 26)

as needed to eliminate any

side-to-side movement

and push Axle Assembly (6)

through hole in the left End

Panel (5) as far as

possible.

See layout below.

IF LOOSENESS

EXISTS, use

additional 5/8"

Thick or Thin

Washers (16 or 26)

inside the

End Panel to

eliminate any side

movement.

NOTE: Tines must not move from side to side inside opening of end panels.

Step 4-A

Slide the Handle Grip (10) on to the Handle Assembly (8) as illustrated.

10 8