Instructions / Assembly

16 1019100-C
English Manual
================================================================================================
MAINTENANCE / SPECIFICATIONS
MAINTENANCE
- After the first 30 minutes of
use check all fasteners for
tightness.
- Tines are manufactured with galvanized steel to resist
wear of abrasive soil. Striking objects can cause tines to
curl or break. Contact our Customer Service Department
to purchase replacement Tines (Part # 1018833).
- PREVENTING RUST: Aerators are essentially
maintenance free. However as with any steel product,
it can rust. Apply a light coat of oil on tines after use to
prevent rust. For rust appearing on painted surfaces,
sand lightly and coat with enamel.
- Periodically remove debris that builds up between tines.
- Apply lubricating oil at each tine and
bearing before use.
STORAGE
points facing the wall or ground.
- Store Aerator on the ground or low to the ground.
- Do not store Aerator hanging from the wall, ceiling or
with Tine points facing outward.
- Product packaging can be used to offer a protective area
around the Tines.
- Drawbar is a trip hazard. Avoid leaving Drawbar in aisle
ways and walking paths.
CAUTION: Avoid Injury! Keep body parts away from under drawbar.
Do not disconnect aerator from the towing vehicle with weight on the tray.
SPECIFICATIONS
Maximum Towing Speed ............. 5 mph.
Maximum Load ................... 150 lbs.
Empty Weight ..................... 42 lbs.
Maximum Towed Weight ............ 192 lbs.
CAUTION:
AVOID INJURY!
- Store Aerator
in low traffic
aisleways.
- Store Aerator
with the tine
The Aerator Tines are very
sharp. Care should be taken
when choosing a storage
location for this product.