Instructions / Assembly

1009725-A

ASSEMBLY

================================================================================================

Attach Height Adjustment

Handle (2) to Lower Pivot (43)

side plate using Bolt (13) and

Lock Nut (21) in Panel 04.

Tighten hardware securely.

Note: Large hole (A) in bottom

of the Height Adjustment

Handle (2) must ﬁ t over the

Tube (B) extending past the

Lower Pivot (43) side plate.

Note: Wheel assembly not shown for clarity.

Figure 04

Figure 05

Using the hardware in Panel 05:

First, assemble the Bolt (27) through the Left Tow Bar

(4) as shown and tighten securely:

• Bolt (27)

• 2 Washers (19)

• Lock Washer (18)

• Nut (16)

Second, assemble the Lock Arm (1) to the bolt as

shown:

• 2 Washers (19)

• Lock Arm (1)

• Nylon Lock Nut (1)

Note: Do not over tighten the Nylon Lock Nut (25).

The Lock Arm (1) should be able to pivot freely after

assembly.

Last, assemble over the end of the Bolt (27):

• Vinyl Bolt Cap (7)

First

Second

Last