Use and Care Manual

================================================================================================

1009725-E

ASSEMBLY

STEP1

---------------------------------------------------------------------------------

Align the

Right Tow Bar tubing (3)

and the Left Tow Tube (4)

against the top of the Brush

Housing (45).

Attach the

tubes using the

hardware from

PANEL01as

shown here.

DO NOT TIGHTEN

THE FASTENERS AT

THIS TIME.

TIP 1: Anorganizedskinpackwithallnecessaryhardwarehasbeenprovidedwiththisproduct.

Besuretousethehardwarepanelscalledforineachstepoftheassembly.

NOTE: Hardware Panels 08 and 09 will not be used in this assembly.

------------------------------------------------------------

TIP 2: During assembly you will need to shift the tires away from

theBrushHousing(45).

To do so, firmly grasp the Lower Pivot bar (43) in one hand,

and the Brush Housing (45) in the other. Pull apart.

NOTE: This will especially come in handy on Step 1.

================================================================================================