Manual

Store with the

lens covers to

protect the lens.

BCS 18-55

User Manual

18-55mm F1.2

Brinno Lens

Aspherical

3. Installation

2. Parts of device

Glass

Driving Holes

Brinno Lens

IR Filter

Top cover

Bottom cover Aperture

Focus

a. Rotate lens upwards, then place the IR lter horizontally. b. Screw in IR lter

with ngers. c. Insert the screwdriver* from TLC200 Pro into one of the driving

holes, turn clockwise until tight.

* For more information, please refer to the TLC200 Pro manual page 5(Package Content).

3-2 To install the IR Filter on the TLC200 Pro

a. Turn TLC200 Pro face down to the oor to protect against dust getting on

the sensor.

b. Rotate counter-clockwise to unlock the BCS 019.

3-1 To remove the current lens kit(BCS 019) from TLC200 Pro

IR Filter works with BCS 019, BCS 18-55 and BCS 24-70. It’s recommended to

keep IR Filter on TLC200 Pro.

Zoom

a. b.

1. Package contents

Brinno Lens 18-55 mm F1.4 (BCS 24-70) x 1

Lens Bag x 1

IR Filter x 1

IR Filter case x 1

User manual x 1

PAGE 1
BCS 18-55 2. Parts of device Brinno Lens IR Filter Brinno Lens 18-55mm F1.2 Aspherical Top cover Bottom cover User Manual Glass Driving Holes Zoom Aperture Focus 3. Installation 3-1 To remove the current lens kit(BCS 019) from TLC200 Pro a. b. Store with the lens covers to protect the lens. 1. Package contents a. Turn TLC200 Pro face down to the floor to protect against dust getting on the sensor. b. Rotate counter-clockwise to unlock the BCS 019. 3-2 To install the IR Filter on the TLC200 Pro a.
PAGE 2
3. Installation 5. Specification 3-3 To install Brinno Lens (BCS 18-55) on TLC200 Pro MODEL BCS 18-55 MOUNT TYPE CS-mount FOCAL LENGTH 18-55 mm APERTURE F1.2 ~ 1.9 Remove the bottom lens cover and turn the BCS 18-55 clockwise to install the lens on the TLC 200 Pro. Be careful when using different lens, the TLC200 Pro may tip over due to the gravity center shift especially without battries. ANGLE OF VIEW 113 ~ 48˚ FOCUS DISTANCE Tele 1cm ~ ∞ Wide 35cm ~ ∞ SIZE Ø43 x 55 mm 4.