TimeLapse BFC100- Self-Portrait Camera BFC100 Quick Guide w w w. b r i n n o .
Self-Portrait Camera BFC100 SD Card Extension Port 1 TimeLapse Camera 2 Self-Portrait Mirror & Shutter Line (TLC200 f1.2) (ATS110) BFC100 - Installation STEP 1. Install the Self-Portrait Mirror. SD Card Attach the magnetic holder onto the camera lens ring as shown in the illustration. STEP 2. SD Card Install the Shutter Line. Plug the Shutter Line into the extension port of the camera. STEP 3. Configuring Settings 1 2 Set up screen File StopMotion File A File B 1. Switch ON. 2.
Stop Motion & Output Folder To record any event that changes over time, it is recommended to specify the Output Folder (File A /File B / File C / File D). - Select a different folder to store captured shots based on its category (i.e. "Activities" or "People"). File File StopMotion File A File B File C File D Shutter File D OK 2013/06/13 10:22:24 As long as the same folder is being selected, the system will Continue Saving the recorded shots from the last recorded image in the folder. 3.
STEP 5. Start Recording SD Card Extension Port SD Card To capture a shot, press the shutter button for 1 second to snap and wait for 5 seconds before capturing the second shot. To maintain the same position, remember to keep the same Capture Distance everytime you capture a shot. The Red Led indicator blinks when it is recording. Remain in the same position until the LED indicator turns Green.
Visual Pregnancy Diary Traveling Journal
Record Weight Loss STEP 6. Finish Hold the “OK” button until the LCD light turns on and shows the text “Processing”, it means the camera is processing file closing. When completed the processing it will display the text "Ready” This indicates the recording session is complete.
