HomeWatchCam Motion Activated Portable User Manual MAC 100 www.brinno.
Brinno Motion Activated Camera MAC100
Thank you for purchasing Brinno HomeWatchCam! Brinno portable HomeWatchCam(MAC 100) using Motion Activated technology to capture any movement in the detecting area, and turn the thousands photos into short time-lapse video, it will save lots time to review those photos! You can use HomeWatchCam for home security, or put it on your backyard to capture beautiful birds and tricky doggie! HomeWatchCam Features HomeWatchCam come with unique Power control technology, 4 AA batteries can capture 50,000 frames .
Package Contents AA AA AA AA 1 2 1 HomeWatchCam 2 Mounting Holder 3 Rubber Suction 3 4 SD Setup 5 6 4 4 AA Batteries 5 SD card 6 Setup Software (included in SD card) Parts of the Camera Front Back Open 2 1 3 6 4 5 1 2 3 4 2 Battery door latch Lens Motion Sensor Power button 7 5 6 7 8 LED indicator Tripod screw hole Battery SD card slot Brinno Motion Activated Camera MAC100 8
Initial Setup-1 Install Software Before your first time to use HomeWatchCam, please complete Initial Setup 1~3 to ensure your HomeWatchCam will record the video with correct time stamp. 1 2 Supported OS: Microsoft Windows 98, XP, Vista, Win 7 SD 3 SD card 4 Setup MAC 5 6 HomeWatchCam Setup 1 2 3 4 5 6 HomeWatchCam Player Insert SD card included into your computer or notebook. Browse to the SD card, double click " Setup MAC" to install setup software.
Initial Setup-2 Set Date and Time Before using your HomeWatchCam, please set the correct date and time, follow below steps: 2 1 SD HomeWatchCam Setup 4 3 B A C D 1 Insert SD card included into your computer or notebook. 2 Run " HomeWatchCam Setup" program to set date and time. 3 At Brinno HomeWatchCam Date and Time program: A. Set time B. Set date C. Select a drive letter assigned to your SD card drive. D. Select "OK" to save setting file to SD card.
Initial Setup-3 Insert Batteries and SD card Complete this step to finish Date and Time setting, follow below steps: 1 2 3 AA AA AA AA 4 5 SD 6 I'm ready! 1 second 1 2 3 4 5 6 Pull the latch to open HomeWatchCam. Install batteries and insert SD card, then close HomeWatchCam. Push the latch to lock HomeWatchCam. Hold Power button for 1 second to turn on HomeWatchCam. The Green LED light will flash for several seconds. When the Green LED light stop flashing, you already finish the Initial Setup.
Installation Basic Installation 1 A° About Motion Sensor A°: Detecting Angle: 98° B°: Detecting Distance: 4 meters B° 3 2 4 1 second 5 6 15 seconds 7 3 circles 1 The Motion Sensor detecting angle: 98°, detecting distance: 4 meters. 2 Insert Mounting Holder into HomeWatchCam. 3 Place the HomeWatchCam to the detecting area you want to capture: A. Mounting on the wall. B. Place on a plane. 4 Hold power button for 1 second to turn on HomeWatchCam.
Installation Operation Definition 8 Motion Sensor Activated Capture for 30 seconds Motion Sensor Activated Capture for 30 seconds Motion Sensor Activated Capture for 30 seconds One single AVI. No Activities, capture finished.
Installation Advanced Installation 1 2 1 You can install Rubber Suctions onto Mounting Holder, to attach HomeWatchCam on windows or polish plane. 2 You can install HomeWatchCam on any standard tripod.
Software "HomeWatchCam" Player 1 2 HomeWatchCam Player 1 Double click on the icon "HomeWatchCam Player" to start the program. 2 HomeWatchCam Player: HomeWatchCam player is designed for use with the Brinno’s HomeWatchCam. The AVI file format produced by the HomeWatchCam is a Motion JPEG-encoded AVI in a standard format recognized by Microsoft’s Windows Media Player and most other Generic Video Players. NOTE • The HomeWatchCam Player is NOT a general-purpose media player.
1.3. Speed Control The Speed Control is a vertical tracking control on the right side of the display window. This is used to set the playback rate. Because this is a timelapse video, the playback rate has to be different from the recording rate. Note that in some installations, if the requested playback rate exceeds the host PC’s ability to decompress and display frames, some frames may be skipped in order to keep up with the requested time-lapse video rate.
1.6. Playlist HomeWatchCam Player allows you to play multiple files, either from the same directory or from multiple directories. To add files to an existing playlist, simply drag and drop one or more files into the HomeWatchCam Player window. Alternatively, using the “File – Open” dialog box will allow you to select multiple files. Files will be sorted in the playlist by their date and time stamp.
Note 12 Brinno Motion Activated Camera MAC100
Specifications Model Video Resolution Field of View Motion Sensor Capture Time Time Interval Memory Storage Power Source Size (DxWxH) Weight OS Requirements MAC 100 1280x 720 (HD Resolution, AVI format) 61º Detect Angle: 98º Detect Distance: 4 meters One activated capture photos for 30 seconds Captures 10~30 frames in 30 seconds. (Capture rate may reduce its frames while media capacity reduced.
www.brinno.com 7F, No. 75, Zhou Zi St., Taipei City 11493, Taiwan Phone: +886-2-8751-0306 Fax: +886-2-8751-0549 Email: customerservice@brinno.
