The Digital Door Viewer! User Manual Motion Activated Sensor MAS 100
01- MAS100 Thank you for purchasing Motion Activated Sensor for Brinno PeepHole Viewer! Brinno MAS100 is an extension accessory for PeepHole Viewer (PHV1330), it allows PHV1330 records images when a visitor come close to your door. So even if you are not at home, you will know who came to your door. WEEE Directive & Product Disposal At the end of its serviceable life, this product should not be treated as household or general waste.
MAS100 -02 Package Contents 5 1 1 4 2 Motion Activated Sensor (MAS100) 2 AA Batteries 5 Screw 3 2 Holder 3 4 Receiver (RFS100) Before Installation 1 2 1. Install 2 AA batteries on Motion Activated Sensor (MAS100). 2. Install receiver(RFS100) into extension port on PeepHole Viewer (PHV1330).
03- MAS100 Installation 1 2 3 -a 3 -b Indoor Outdoor Indoor Outdoor D2* A1* D1* 1. Install Holder and tightening the screw. 2. Tear off the cover of double-sided glue. 3. Place your Motion Activated Sensor(MAS100) on our suggestion location: a. Place on ceiling above the porch and face to ground. b. Place above door, and adjust the Motion Activated Sensor angle, face to ground.
MAS100 -04 Finished LED Now, you already finished the installation, for well working we suggest you to test the detect of Motion Activated Sensor, if it works on the location you placed, then you can use screws to fix it on the wall. If it doesn't work, please try to adjust the detect angle or change to the other location.
05- MAS100 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
7F, No.75, Zhou Zi St., Taipei City 11493, Taiwan Phone: 886-2-8751-0306 Fax: 886-2-8751-0549 E-mail: customerservice@brinno.com www.brinno.
