Instructions / Assembly

5
Product Dimensions
HEIGHT WIDTH DEPTH
102.6 cm (40.4 in.) 32.6 cm (12.8 in.) 36.7 cm (14.4 in.)
Operational Specications
CAUTION: This unit dispenses water at temperatures that can cause severe burns. Avoid direct
contact with hot water. Keep children and pets away from unit while dispensing. Never
allow children to dispense hot water without proper and direct supervision. Unplug unit
to prevent unsupervised use by children.
TEMPERATURE TANK CAPACITY FLOW RATE
DISPENSING
COLD WATER
37°-50°F / 3°-10°C 3.6 L
35 mL per second /
1.5Lper hour
DISPENSING
HOT WATER
176°–198°F / 80°–92°C 1 L
35 mL per second /
4.5 L per hour
INSTALLATION
1. Determine Installation Location
A. Place the dispenser upright.
B. Locate the dispenser on a hard and level surface in a
cool shaded location near a grounded wall outlet.
NOTICE: Do NOT plug in the power cord until the entire
installation section is completed.
C. Position the back of the dispenser no closer than 20 cm
(8 in.) from a wall and permit free airow between the
wall and water dispenser.
2. Install the Drip Tray and Grid
A. Unwrap the drip tray (4) from the packaging material and
slide it onto the dispenser until it is secure in place.
4