Use and Care Manual
3
SAFETY INFORMATION
WARNING: To reduce risk of injury and property damage, you must read this entire guide before
assembling, installing and operating the dispenser.
WARNING: This product dispenses water at very high temperatures. Failure to use properly can
cause personal injury. When operating this dispenser, always exercise basic safety
precautions, including the following:
• Prior to use, this dispenser must be properly assembled and installed in
accordance with this manual.
• For indoor use only. Keep the water dispenser in a dry place away from direct
sunlight. Do NOT use outdoors.
•
• Do NOT place the water dispenser in an enclosed space or cabinet.
• Do NOT operate the dispenser in the presence of explosive fumes.
• Use only properly grounded outlets.
• Do not use an extension cord.
• Always grasp the plug and pull straight out from the outlet. Never unplug by pulling
on the power cord.
• Do NOT use the dispenser if the cord becomes frayed or otherwise damaged. If
the supply cord is damaged, it must be replaced by the manufacturer, its service
• To protect against electric shock, do NOT immerse cord, plug, or any other part of
the dispenser in water or other liquids.
• Do not use this dispenser with water that is microbiologically unsafe or of
unknown quality.
• Water dispenser is compatible with 3- or 5-gallon (12- or 19- liter) water bottles.
• Clean up all water spills after loading or unloading water bottles from the
dispenser.
• Ensure the water dispenser is unplugged prior to cleaning.
• Never allow children to dispense hot water without proper and direct supervision.
Unplug the unit to prevent unsupervised use by children.
•
• The appliance must not be cleaned by a water jet and is not suitable for
installation in an area where a water jet could be used.
WARNING: Keep ventilation openings, in the dispenser enclosure or in the built-in structure, clear
of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process,
other than those recommended by the manufacturer.
• This dispenser should work under environment of temperatures from 4°C~40°C
• Never turn the dispenser upside down or lean it more than 45°.
• After turning the dispenser off, allow the dispenser to sit idle for 3 minutes before
turning on again.