Instructions / Assembly

ManualsBrandsBrio ManualsKitchenTri-Temp 2-Stage Countertop Point of Use Water Cooler with UV Self-Cleaning

Thank you for purchasing a Brio

water cooler

Please read and understand this manual before operating your water dispenser

Retain this manual for future use

INSTRUCTION MANUAL

WATER DISPENSER

MODEL NO. CLCTPOU620UVF2

Summary of content (13 pages)

PAGE 1
INSTRUCTION MANUAL WATER DISPENSER MODEL NO.
PAGE 2
TABLE OF CONTENTS SAFETY INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRODUCT FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Product Dimensions. . . . . . . . . .
PAGE 3
SAFETY INFORMATION WARNING: To reduce risk of injury and property damage, you must read this entire guide before assembling, installing and operating the dispenser. WARNING: This product dispenses water at very high temperatures. Failure to use properly can cause personal injury. When operating this dispenser, always exercise basic safety precautions, including the following: •• Prior to use, this dispenser must be properly assembled and installed in accordance with this manual. •• For indoor use only.
PAGE 4
INTENDED USE This appliance is intended to be used in household and similar applications such as: •• Staff kitchen areas in shops, offices and other working environments •• Farm houses •• Clients in hotels, motels and other residential type environments •• Bed and breakfast type environments •• Catering and similar non-retail applications This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless t
PAGE 5
Indicator Panel Description 5 1. Hot Water Button – Press to activate the hot water feature. The Hot icon illuminates to indicate hot water feature is selected and working. 6 7 2. Child Lock Button – Press to activate the child safety lock feature. This de-activates the hot water feature. 3. Ambient Water Button – Press to activate the ambient water feature. The Ambient icon illuminates to indicate that ambient water is selected. 1 2 3 4 4.
PAGE 6
INSTALLATION 1. Install the Dispenser A. Place the dispenser upright. B. Locate the dispenser on a hard and level surface in a cool shaded location near a grounded wall outlet. 3 NOTICE: Do NOT plug in the power cord until the entire installation section is completed. C. Position the back of the dispenser no closer than 20 cm (8 in.) from a wall and permit free airflow between the wall and water dispenser. D. Ensure the drip tray (3) is placed securely in the dispenser to ensure it does not fall off.
PAGE 7
E. Gently tug on the tube (B) to ensure a secure connection with the feed water adapter (F). F B 3. Flush the Filters IMPORTANT: Follow this procedure every time you replace your filters. IMPORTANT: Ensure the water supply is off before you begin. A. Connect a filter (D) to the filter housing (C) by twisting the filter (D) clockwise. C D B. Connect the tip of the shut-off valve tube (B) to the left side of the filter housing (C). C B C.
PAGE 8
4. Install the Filters and Complete the Installation A. After flushing, twist each filter (D and E) clockwise into the filter housings located inside the dispenser cabinet. The sediment filter (D) goes on the left, the carbon +ultra filtration filter (E) on the right. E D B. Remove the safety plug from the water inlet hole on the back of the dispenser by pushing in the inlet hole collar and then gently pulling out the plug. C.
PAGE 9
OPERATION IMPORTANT: This unit has been tested and sanitized prior to packing and shipping. During transit, dust and odors can accumulate in the tank and lines. Dispense and dispose at least one quart of water prior to drinking any water. Turn the Dispenser On/Off IMPORTANT: Before you activate the hot and cold switches, ensure water has filled the tanks inside the dispenser in order to prevent dry heating. 1. Plug in the dispenser and turn the On/Off switch to On. 2.
PAGE 10
TROUBLESHOOTING PROBLEM SOLUTION •• It takes up to one hour after setup to dispense cold water. •• Make sure the power cord is properly connected to a working outlet. The cold water is not cold. •• Make sure the back of the dispenser is at least 20 cm from a wall and there is free airflow on all 20 cm sides of the dispenser. •• Make sure green power switch on back of dispenser is On. •• If water still isn’t cold, call customer service at +1 844-257-4103 for assistance.
PAGE 11
Filter Replacement Schedule FILTER TYPE REPLACEMENT SCHEDULE FUNCTION Carbon + Ultra Filtration 6 months or 950 gallons Reduces chlorine, taste and odor, lead and cysts. Sediment 6 months or 950 gallons Performs a coarse filtration of original water. Removes mud, sand, iron, rust, and suspensions, and impurities. Replace the Filters IMPORTANT: Only replace the filters with new filters designed for this dispenser. Any other type of filter will damage the machine and void any warranty.
PAGE 12
WARRANTY Brio (“Vendor”) warrants to the original purchaser of the Brio Water Coolers (the “Product”), and to no other person, that if the Product is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in the Product shall be free from defects in material and workmanship.