Use and Care Manual

12
Operation
IMPORTANT: This unit has been tested and sanitized prior to packing and shipping. During transit, dust and
odors can accumulate in the tank and lines. Dispense and dispose at least one quart of water
prior to drinking any water.
Turn the Dispenser On/O
IMPORTANT: Before you activate the hot and cold switches, ensure water has filled the tanks inside the
dispenser in order to prevent dry heating.
1� Plug in the dispenser and turn the On/O switch to On.
2� Run water through the tap until water begins to dispense.
3� To power on the cooling system, flip the cooling switch on the back of the dispenser to the On position.
The cold water button on the front of the dispenser illuminates in blue indicating that the dispenser is
cooling water. The light turns o when the cooling process is complete.
4� To power on the heating system, flip the heating switch on the back of the dispenser to the On position.
The hot water button on the front of the dispenser illuminates in red indicating that the dispenser is heating
water. The light turns o when the heating process is complete.
Set the Clock
1� Press and hold the up and down arrow buttons for 3 seconds until the clock display begins to blink.
2� Press the cold water button to set the minute and the hot water button to set the hour. Use the up and
down arrow buttons to scroll until the correct minute/hour is displayed.
3� Press the hot water lock button when finished.
Set the Cold Temperature Setting
1� Press and hold the down arrow button for 3 seconds until the cold water button starts to blink and the
current cold water temperature appears on the display.
2� Use the up and down arrow buttons to scroll to your desired cold water temperature. The range is 39˚F to
59˚F (4˚C to 15˚C).
3� Press the lock button when finished. The temperature stops blinking and the time is displayed.
Set the Hot Temperature Setting
1� Press and hold the up arrow button for 3 seconds until the hot water button starts to blink and the current
hot water temperature appears on the display.
2� Use the up and down arrow buttons to scroll to your desired hot water temperature. The range is 174˚F to
194˚F (79˚C to 90˚C).
3� Press the lock button when finished. The temperature stops blinking and the time is displayed.