Use and Care Manual

Dispense Cold and Room Temperature Water

NOTE: Water will take approximately 1 hour after plugging in and turning on to become completely chilled.

1� Place a drinking glass or container under the tap and press the cold water button to dispense cold water or

the ambient water button to dispense room temperature water.

2� Release the button when your container is full.

Dispense Hot Water and Activate the Child Safety Lock

CAUTION: This unit dispenses water at temperatures that can cause severe burns. Avoid direct contact

with hot water. Keep children and pets away from the unit while dispensing. Never allow children

to dispense hot water without proper and direct supervision. Disable the heating feature by

switching the heating convenience switch to the O position.

NOTE: Water will take approximately 15-20 minutes after plugging in and turning on to reach its hottest

temperature.

1� This water dispenser is equipped with a child safety feature in order to prevent inadvertent dispensing. To

disable the child safety lock feature, press the lock button.

2� To dispense hot water, place a drinking glass or container under the tap and press the hot water button.

3� Release the button when your container is full.