Use and Care Manual

15
Filter Replacement Schedule
Filter Type Replacement Schedule Function
Pre-carbon 6 months or 950 gallons Reduces chlorine, taste and odor, lead and cysts.
Sediment 6 months or 950 gallons
Performs a coarse filtration of original water. Removes mud, sand,
iron, rust, suspensions and impurities.
Carbon block 6 months or 950 gallons Taste and impurity removal.
Replace the Filters
IMPORTANT: Only replace the filters with new filters designed for this dispenser. Any other type of filter will
damage the machine and void any warranty.
When a filter is approaching the end of its life, the red indicator light starts to blink. When the filter has reached
the end of its life, the indicator light remains red. To change filters:
1� Shut o the water supply.
2� Remove the old filters and replace with new filters. Ensure the sediment filter is on the left and the carbon
block filter is on the right.
3� To flush your new filters, follow the instructions in Step 5 - Flush the Filters and Complete the Installation.
4� Hold the filter reset switch on the back of the unit for 3 seconds until the filter life reminder light is o.
Filter Specifications
Sediment Filter Pre-carbon Filter
(Sediment, Dirt, and Rust Removal) (Taste and Impurity Removal)
Filter Capacity
950 Gallons
Filter Capacity
950 Gallons
Flow Rate
0.8 GPM
Flow Rate
0.8 GPM
Suggested PSI
14.5 - 58 psi
Suggested PSI
14.5 - 58 psi
Temperature
33 - 100 °F
Temperature
33 - 100 °F
Post Carbon Filter
(Taste and Impurity Removal)
Filter Capacity
950 Gallons
Flow Rate
0.8 GPM
Suggested PSI
14.5 - 58 psi
Temperature
33 - 100 °F