Instructions / Assembly

12
Filter Replacement Schedule
Filter Type Replacement Schedule Function
Pre-carbon 6 months or 950 gallons
Reduces chlorine, taste and odor, lead
and cysts.
Sediment 6 months or 950 gallons
Performs a coarse filtration of original
water. Removes mud, sand, iron, rust,
and suspensions, and impurities.
Post carbon 6 months or 950 gallons Taste and impurity removal.
Replace the Filters
IMPORTANT: Only replace the filters with new filters designed for this dispenser. Any other type of filter will
damage the machine and void any warranty.
When a filter is approaching the end of its life, the red indicator light starts to blink. When the filter has reached the end
of its life, the indicator light remains red. To change filters:
1. Shut o the water supply.
2. Remove the old filters and replace with new filters. Ensure the sediment filter is on the left and the carbon block
filter is on the right.
3. To flush your new filters, follow the instructions in Step 5 - Flush the Filters and Complete the Installation.
4. Press the filter reset button until the red indicator light turns o.
Filter Specifications
Sediment Filter Pre-carbon Filter
(Sediment, Dirt, and Rust Removal) (Taste and Impurity Removal)
Filter Capacity
950 Gallons
Filter Capacity
950 Gallons
Flow Rate
0.8 GPM
Flow Rate
0.8 GPM
Suggested PSI
14.5 - 58 psi
Suggested PSI
14.5 - 58 psi
Temperature
33 - 100 °F
Temperature
33 - 100 °F
Post Carbon Filter
(Taste and Impurity Removal)
Filter Capacity
950 Gallons
Flow Rate
0.8 GPM
Suggested PSI
14.5 - 58 psi
Temperature
33 - 100 °F