Instructions / Assembly

12
Filter Replacement Schedule
Filter Type Model No. Replacement Schedule Function
Sediment NFMPP5M 6-12 months or 3,600 liters
Performs coarse filtration of inlet water,
removing sand, rust, dirt, and other
suspended solids.
Pre Carbon NFMGAC 6-12 months or 3,600 liters
Removes chlorine, and other unpleasant
tastes and odors.
Carbon Block NFMCTO5MS3 6-12 months or 3,600 liters
Performs final polish, removing any residual
impurities.
Replace the Filters
IMPORTANT: Only replace the filters with new filters designed for this dispenser. Any other type of filter will
damage the machine and void any warranty.
When a filter is approaching the end of its life, the red indicator light starts to blink. When the filter has reached the end
of its life, the indicator light remains red. To change filters:
1. Shut o the water supply.
2. Remove the old filters and replace with new filters. Ensure the sediment filter is on the left and the carbon block
filter is on the right.
3. To flush your new filters, follow the instructions in Step 5 - Flush the Filters and Complete the Installation.
4. Press the filter reset button until the red indicator light turns o.
Filter Specifications
Sediment Filter Pre Carbon Filter
(Sediment, Dirt, and Rust Removal) (Chlorine, Taste and Odor Reduction)
Filter Capacity
3,600 Liters
Filter Capacity
3,600 Liters
Flow Rate
3 LPM
Flow Rate
3 LPM
Suggested PSI
14.5 - 58 psi
Suggested PSI
14.5 - 58 psi
Temperature
33 - 100 °F
Temperature
33 - 100 °F
Carbon Block Filter
(Final Polish)
Filter Capacity
3,600 Liters
Flow Rate
3 LPM
Suggested PSI
14.5 - 58 psi
Temperature
33 - 100 °F