Instruction manual

4140

RESET

Allows you to clear all settings and restore the factory conﬁ guration. Select the option YES and

press the ENTER button on the remote control or the MENU/SELECT knob on the main unit to

start the reset to factory settings or NO to cancel the operation.

CAUTION: all the date, clock, alarm, equalizer presets, and radio stations settings will be lost.

FIRMWARE VERSION

Allows to view the ﬁ rmware version installed in the unit.

USING THE ALARM

Setting the alarm

1. Turn the radio on, press

or on the remote control to select alarm 1 or alarm 2.

The icon

or the icon will ﬂ ash on the display.

Press ENTER to enter the Alarm menu, press

on the remote or turn the MENU/

SELECT knob on the main unit to adjust the desired time for the alarm. Press ENTER or the

MENU/SELECT knob to conﬁ rm your choice

and move to the next function , or press

BACK to return to the previous menu item.

After setting of the alarm time, you can select the alarm source (DAB/FM/Buzzer). By setting

DAB or FM you can set a radio station stored in the preset, to be associated to the alarm or the

last radio station listened to.

The next option is the repetition frequency of the alarm that may have the following options:

Once – Daily – Weekdays – Weekends. When selecting the option Once you need to conﬁ rm

the date of the alarm before moving on to the next step. Set the playback volume of the alarm.

When the alarm is set to ON and saved, the icon for alarm 1 and/or 2 will be shown on the

display to indicate the active status.

ENGLISH

ENABLING OR DISABLING THE ALARM

In standby mode, press

or on the remote control to enable or disable the alarm, or turn

on the radio, press

or to select alarm 1 or 2, on the remote control press the buttons

to select ON/OFF and conﬁ rm with ENTER.

The icons are shown on the display to conﬁ rm that the alarm has been activated.

SNOOZE OPTION AND ALARM SLEEP MODE

While the alarm is enabled, press SNOOZE on the remote control to repeat the alarm after a

certain interval (according to the settings entered in the relevant menu - the default value is 5

minutes) or by pressing the VOL/STANDBY knob on the main unit.

When the SNOOZE mode is active, the display shows the

Zz icon that identiﬁ es its active status

of operation.

To stop the alarm, press any button on the remote control except for SNOOZE, or any knob on

the main unit except for VOL/STANDBY.