Instruction manual

BriskHeat

Centipede 2

Module System

Instructions

Single-Zone View

Touch any zone in the Multi-Zone view to go to the detailed Single-Zone View

A. Current Performance of Zone

 Temperature: Actual temperature in °C

 Power Duty Cycle: In %

 Status Message: See page 14 for common list of status messages

 Green color: OK status mode

 Red color: Alarm/Error status mode.

 Orange Color: Alarm Latch Mode

B. Displays zone parameters: Set-point, low-limit alarm, high-limit alarm,

alarm latch on/off, zone on/off.

C. Displays zone number

D. Multi-zone view button: To Multi-zone view. See page 12.

E. Edit zone button: Touch to edit the current zone. See Edit a Single

Zone (page 15).

F. Left navigation: View next zone

G. Right navigation: View previous zone

H. Scroll button:

Activates automatic scroll of zones

Pauses automatic scroll of zones

See page 22 for how to adjust scroll rate

BriskHeat

Centipede 2

Module System

Instructions

Change Operator Interface Name

1. Touch the O/I Name field. A keyboard screen appears.

2. Input the desired Operator Interface name (maximum 12 character

including spaces). Touch when complete. exits back to

General Options screen.

3. Touch in General Options menu to save changes.

Change Scroll Rate

NOTE: The default Scroll Rate is set to 5 seconds

1. Touch the Scroll Rate field. A numeric keyboard screen appears.

2. Type the desired scrolling rate (1 to 99 seconds)

Touch when complete. exits back to General Options screen.

3. Touch in General Options menu to save changes.

4. Touch the Cancel icon to disregard any changes made to the Scroll

Rate field.