Instruction manual

BriskHeat
®
Corporation. All rights reserved
20
Centipede 2
®
Module System
Instructions
General Options
Getting There
Main Menu Global Program Reset Default Setting
Basic Navigation
 Touch the desired eld to program. See pages 22 to 23 for detailed
instrucons.
 Saves General Opon changes.
 Exits out of General Opons menu without saving. Returns
to Opons / Set-up menu.
BriskHeat
®
Corporation. All rights reserved
13
Centipede 2
®
Module System
Instructions
Understanding the Status Codes
Status Message Description
OK No alarms present.
Hi Temp
Current actual temperature is above high
alarm limit.
Lo Temp
Current temperature is below the low alarm
limit.
Short RTD RTD is shorted.
Open RTD RTD is open.
Line Com Internal module communication error.
Net Com Err
Communication between module and oper-
ator interface is lost.
DISABLE Zone is disabled (Turned Off).