Instruction manual

BriskHeat

Centipede 2

Module System

Instructions

Touchscreen Interface Mounting Instructions

C2MOD-OI comes equipped with four 4-40 mounting screws and nuts for easy

installation. Cut out a panel using the illustrations below.

BriskHeat

Centipede 2

Module System

Instructions

Example of Screenshot when Password Mode is Enabled

The user would need to enter a password to log-in to enter all edit

menus. See Enter Password below to log-in.

 NOTE: A user will automatically be logged out if there is a

period of 10 minutes of inactivity.

 Edit Mode: Indicates if the user is able to edit module settings.

This mode is Enabled when Password Mode is Disabled or

someone is logged in. The mode is Disabled when Password

Mode is Enabled and someone is logged out.

 Enter Password: Place to enter password when password mode

is enabled. Used to log-in. The default password is ‘briskheat’.

 Set New Password and Confirm New Password: Place to set a

new password when user wants to permanently change the

password. A keyboard screen appears.

Detect Zones

Getting There

Main Menu à Options / Set-up à Detect Zones

Check to make sure all connections are made prior to using this function.

NOTE: When all zones have been found, the screen must be touched to com-

plete zone identification.