Product Manual

BriskHeat
®
Corporation. All rights reserved
8
Silicone Rubber Band Drum / Pail Heaters
WARRANTY INFORMATION
1055 Gibbard Ave, Columbus, OH 43201
Toll Free: 800-848-7673
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Web site: www.briskheat.com
PN: 11663 Rev B
TROUBLESHOOTING GUIDE
Please read this guide prior to contacting BriskHeat
®
. This guide is de-
signed to answer the most commonly asked questions. If you are una-
ble to identify the problem or need additional assistance, please contact
your local BriskHeat
®
distributor or contact us toll free (U.S. / Canada
only) at 1-800-848-7673 or 614-294-3376 or
[e-mail].
PROBLEM SOLUTION(S)
Does not heat Verify heater is connected to proper voltage. The identification
label located on the power cord displays the heater’s voltage
requirement.
Check to see if there is a resistance reading (not an open cir-
cuit) in heater using an ohm meter.
Circuit breaker is
tripping
Validate that the circuit breaker is capable of handling the amp
requirement of heater. The identification label located on the
power cord displays the heater’s amperage requirement.
Does not fit Confirm that the heater provided was designed to fit around your
specified drum.
If the heater was designed for the specified drum, please call
1-800-848-7673 or 614-294-3376 for further assistance.
Something has lightly
spilled on exterior or
interior
Apply any general household cleaner, that does not contain any
silicone rubber dissolving type ingredients, with a clean cloth
fabric.
BriskHeat
®
warrants to the original purchaser for the period of eighteen
(18) months from date of shipment or twelve (12) months from date of
installation, whichever comes first. Contact factory at 1-800-848-7673
(toll free, U.S. / Canada) or 614-294-3376 for complete details.