Product Manual

ManualsBrandsBriskHeat ManualsElectric Garage + Industrial HeatersHeat Tape with Adjustable Thermostat — .5in.W x 10Ft.L

(HSTAT Series)

Instruction Manual

Read and understand this material before operating or

servicing these heating tapes. Failure to understand how

to safely operate these heaters could result in an accident

causing serious injury or death. These heaters should

only be operated by qualiﬁ ed personnel.

Silicone Rubber Heating Tapes with

Adjustable Thermostat Control

Summary of content (5 pages)

PAGE 1
Silicone Rubber Heating Tapes with Adjustable Thermostat Control (HSTAT Series) Instruction Manual Read and understand this material before operating or servicing these heating tapes. Failure to understand how to safely operate these heaters could result in an accident causing serious injury or death. These heaters should only be operated by qualified personnel.
PAGE 2
HSTAT Silicone Rubber Heating Tapes HSTAT Silicone Rubber Heating Tapes IMPORTANT SAFETY INSTRUCTIONS TABLE OF CONTENTS Introduction ......................................................... Safety Alert Symbol.............................................. Important Safety Instructions…………….............. Specifications……………………………................ Operating Instructions…………………................. Troubleshooting Guide…………………………….. Warranty................................................................
PAGE 3
HSTAT Silicone Rubber Heating Tapes HSTAT Silicone Rubber Heating Tapes SPECIFICATIONS OPERATING INSTRUCTIONS Operating conditions: before operating this electric heating tape. STEP 1 Remove heater from box. Visually inspect heater. Do not use if torn or damaged. Maximum Exposure Temperature: 450°F (232°C) Adjustable Thermostat Control 50-425°F (10-218°C) 120 or 240VAC Models Power Density: 6.0 watts/in2 (0.
PAGE 4
HSTAT Silicone Rubber Heating Tapes TROUBLESHOOTING GUIDE Please read this guide prior to contacting BriskHeat®. This guide is designed to answer the most commonly asked questions. If you are unable to identify the problem or need additional assistance, please contact your local BriskHeat® distributor or contact us toll free (U.S. / Canada only) at 1-800-848-7673 or 614-294-3376 or bhtsales1@briskheat.com. PROBLEM SOLUTION(S) Does not heat Verify heater is connected to proper voltage.
PAGE 5
BriskHeat® Corporation 1055 Gibbard Ave, Columbus, OH 43201 Toll Free: 800-848-7673 Phone: 614-294-3376 Fax: 614-294-3807 Email: bhtsales1@briskheat.com Web site: www.briskheat.