User Manual

ENGLISH 17
Important Notice: Read this data sheet and compare the capabilities to your actual water treatment needs before purchasing.
PERFORMANCE DATA SHEET FOR FILTER CARTRIDGE A 1000
Manufacturer Seller
BRITA GmbH BRITA Water Filter Systems
Heinrich-Hertz-Str. 4 Distributors Pty Ltd
65232 Taunusstein Level 9, 123 Epping Road
Germany North Ryde, NSW, 2113
+49-(0) 6128-746-0 Australia
Tel +61 2 9486 4200
Fax +61 2 9486 4222
www.brita.com.au
PRODUCTS
Water Filter Systems
A 1000 Filterhead 0 % G 3/8"
USE GUIDELINES
Minimum operating pressure: 0.1 MPa
Maximum operating pressure: 0.86 MPa
Do not allow exposure to temperatures below 4 °C.
Maximum operating temperature: 30 °C
Nominal fl ow rates:
A 1000 (60l/h)
This system must be installed according to local plumbing codes
on the cold water line.
Replacement Cartridges
Refi ll A 1000
This system requires regular replacement of the fi lter cartridge to
maintain proper operation. Varying scale, chlorine, sediment, or
organic substance levels may affect replacement frequency.
Be sure to change the fi lter cartridge at least as indicated in the
capacity table (refer to your Instruction Guide) or six monthly
which ever occurs fi rst, or whenever you detect a change in
taste, odour, or a decrease in fl ow.
Please ensure that a backfl ow prevention device, meeting the
requirements of AS/NZS 3500.1, is installed on the water supply
inlet to the fi lter unit.
Caution: Do not use with water that is microbiologically
unsafe or of unknown quality without adequate disinfection
before or after the system. System is to be supplied only
with cold water.
III. Important notes