Specification

12
auxiliary faucet installation
12
 If leaks continue, turn o the water supply and
call Customer Service or your local plumber.
Leaks between system
head and filter housing
• Remove the filter housing and inspect the o-ring.
• Make sure it is in place and free from dirt and
particles.
• Install the filter/filter housing.
• Turn on the cold water supply valve and turn
on the filter faucet.
• Make sure filter housing is seated tightly.
• Turn o the cold water shut-o valve to the
filter system.
• Locate the kitchen faucet adapter.
- If the plastic tubing is leaking,
follow the previous steps.
- If the thread between the kitchen
faucet adapter and the kitchen faucet
stem is leaking, tighten more securely. If
leaking continues, disconnect the
plastic tubing and remove the kitchen
faucet adapter. Wrap the kitchen
faucet adapter and the cold water supply
line with plumber’s tape and re-install.
- Turn the cold water shut-o valve back
on and turn on the faucet.
Leaks on Kitchen Faucet
Water Line connections
Troubleshooting
Guide
• Turn o the cold water shut-o valve. Press
in the collar on the Inlet and/or Outlet fittings.
Remove tube and inspect. Repair/replace
tubing. Reconnect tubing. Ensure it hasn't been
crimped.
• Turn the cold water shut-o valve back on and
turn on the faucet.
Leaks around fittings
Leaks around Kitchen
Faucet connection
• Turn o the cold water shut-o valve to the
filter system.
• Locate the compression cap covering the spray
hose connector stem.
- Make sure the cap is seated correctly and
securely.
- If leaking continues, try using plumbers
tape or check to see if another size of cap
works better.
• Turn o the cold water shut-o valve.
• Check for leaks around the compression
fitting. If leaking, check to make sure
connections are all secure.
• If leaking continues, disconnect the 3/8"
plastic tubing and try wrapping the ferrule
with plumbers tape and tighten compression
nut.
Leaks around Auxiliary
Faucet
• Turn o the cold water shut-o valve to the
filter system.
• Locate the kitchen faucet adapter.
- If the plastic tubing is leaking, follow
the previous steps in "Leaks around
fittings" section.
- If the thread between the kitchen faucet
adapter and the kitchen faucet stem is
leaking, tighten more securely. If leaking
continues, disconnect the plastic tubing
and remove the kitchen faucet adapter.
Wrap the kitchen faucet adapter and
the cold water supply line with
plumber’s tape and re-install.
- Turn the cold water shut-o valve back
on and turn on the faucet for filtered
water.
Leaks on Auxiliary
Faucet Adapter
connection
For Drop-In Filtration
System USS-120