Owner`s manual

15
HOW TO SET-UP
TO FIT CANOPY
A. With the viewing window ap on the
outside, grasp the Canopy ensuring the
two plastic frame sections at both sides
are aligned.
B. Push the two plastic frame sections at
both sides onto the Infant Carrier at the
inside of the handle pivot point.
C. Ret the elastic Canopy strap to the
dedicated elastic trim strap on each side of
the Infant Carrier.
D. The Canopy can be rotated to cover the
baby or opened by rotating to the desired
position.
TO REMOVE CANOPY
A. Ensure Canopy is in the collapsed
position. Unclip the elastic Canopy straps
which are secured by plastic hooks under
each handle attachment point.
B. Grasp the Canopy and pull it away from
the Infant Carrier ensuring the straps are
clear of catching any objects.
A
NOTE: Elastic Canopy loops must always be
tted when Canopy is in use.