Owner`s manual

HOW TO USE

IMPORTANT:

Do not place the Infant Carrier on a table or a work-top, where it could fall off or be

knocked on to the oor.

PLACING BABY & INFANT CARRIER IN BASE

Click

A. Position the Infant Carrier over the top of the

base. Make sure the Harness Adjustment Strap is

not caught between Infant Carrier and Base then

lower the Infant Carrier into position.

IMPORTANT:

Lift again to check engagement.

CAUTION:

C. The handle may be rotated into other positions if

needed although this may be difcult with the seat

in front.

B. Push down on the Infant Carrier until an

audible click is heard. Pull on the Infant Carrier

to ensure it is correctly locked into position.

If tted with the Britax Stroller

Click & Go™Adaptor, ensure to

operate the handle as per pages 13

and 14 to prevent pinching ngers.