Owner`s manual

HOW TO REMOVE THE BRITAX STROLLER ADAPTOR

If you need to remove the Britax Stroller Click & Go™ Adaptor ensure cover is moved

aside and handle is in “rocking position” . First unscrew the Press Pin half way

and then pull out. Pull out the locking pin and gently remove the adaptor away from

carry handle. Store for future use with these instructions.

The Stroller instruction book will also provide full instructions for use on a Stroller.

TRAVEL SYSTEM -

BRITAX STROLLER CLICK & GO™ADAPTOR

E. Now replace the trim pull elastic underneath

the adaptor and hook. Place elastic in groove

shown below.

hook

loop

Hook elastic

behind the

adaptor and

place in groove

D. Then push the Press Pin in the bottom hole

and push into place.

Push in Press Pin

* Refer to page 13 for handle position