Owner`s manual

55
IF THE CAR IS FITTED WITH CHILD
RESTRAINT ANCHORAGE POINT
Locate the anchorage point behind the rear
seating position. (consult the car owners
handbook for the location of the anchorage
point). The anchorage point should be
directly behind and central to the restraint.
Remove thread plug from the parcel shelf/
oor/roof, etc. and install anchor bolt and
tting as shown in Fig 1.
CAUTION: DO NOT OVERTIGHTEN ANCHOR
BOLT. OVERTIGHTENING MAY FRACTURE OR
BREAK BOLT. MAXIMUM TORQUE IS 20 Nm
(14.75 ft.lb.)
Note: Minimum of ve full turns of anchor
bolt is required before tightening force is
applied.
Front of Vehicle
UPPER ANCHORAGE FITTING
Attachment Bolt
Lock washer
Anchor tting
Spacer(s) if
required
Vehicle metal
structure
Vehicle trim
Fig.1.
INSTALLATION OF CAR ANCHOR FITTING