User guide

40
41
Rotate the positioning block to the 1
front and place the child seat on the
vehicle seat.
Ensure harness height is adjusted *
to fit your child.
Position the shoulder part of the
2
vehicle belt behind the head restraint.
IMPORTANT: DO NOT route the vehicle
belt under the cover or through the belt
guide on the head restraint.
Route the lap and shoulder parts 3
of the vehicle belt over the lap belt
guide, through the belt slot, across
the back of the child seat shell, then
through the second belt slot.
Verify the vehicle belt is not twisted,
4
then buckle.
Push the child seat firmly into the
5
vehicle seat while removing all slack
from the lap part (a), then from the
shoulder part (b) of the vehicle belt.
Ensure that the vehicle belt is *
locked as directed by your vehicle
owners manual.
The child seat is secure when it *
cannot be moved front-to-back
or side-to-side more than 1 in.
(2.5 cm) at the belt path. If the
child seat is not secure, repeat
the installation procedure or use a
different seating location.
Firmly press the Versa-Tether
6
®
hook
to the vehicle tether anchor to attach.
Remove all slack from the tether
webbing.
Use the elastic strap to contain extra
7
webbing.
3
4
OR
OR
Checklist
Check that positioning block is rotated to the front. 9
Check all connections and verify that child seat is secure. 9
The child seat is secure when it cannot be moved front-to-*
back or side-to-side more than 1 in. (2.5 cm) at the belt path.
If the child seat is not secure, repeat the installation procedure
or use a different seating location.
Ensure any excess Versa-Tether 9
®
webbing is stored in elastic
band. Always ensure any excess webbing is contained within
your vehicle
Check Versa-T e ther
®
(Top T e ther) attachment
Check vehicle
buckle attachment
<1 in.
Check that Versa-T e ther
®
(Top T e ther) webbing is
stored in elastic band
Check that the
Positioning Block is
rotated to the front
Check that there is
LESS than 1 in. (2.5 cm)
of movement (front to back
or side to side) at the belt path
Installing the Child Seat: Harness ModeInstalling the Child Seat: Harness Mode