User guide

8
Only use the LATCH system on this infant carrier in a seating position
designated by the vehicle owner’s manual. Refer to your vehicle
owner’s manual or contact the vehicle manufacturer for the maximum
weight rating for their LATCH anchors.
This infant carrier was designed to be used with lower LATCH anchors
in vehicle designated seating positions. The standard vehicle seat
spacing between lower LATCH anchors is 11 inches (27.9 cm).
This infant carrier can be used in a seating position with up to 20
inches (50.8 cm) of space between the LATCH anchors if the vehicle
manufacturer allows.
Vehicle Compatibility
Check your vehicle owner’s manual for information on using child
restraints in center seating positions without designated LATCH
anchors.
Locating and Storing the LATCH Connectors
The LATCH connectors are located on the sides of the base inside the
LATCH connector storage slots. Store the LATCH connectors when not
in use.
Up to 20 inches (50.8 cm)