User guide

22 Installing the Base
Follow the steps below if adjustment of the recline angle is
necessary:
a Press the LATCH adjuster
release button to release tension
in the LATCH strap.
b Press the LATCH connector
release button and detach the
LATCH connectors from the
LATCH anchors.
c Turn the recline adjustment knob
to adjust the recline angle.
d Connect and tighten the LATCH
strap.
e Place the infant carrier in the base and check the recline angle.
Repeat the previous steps until a secure fit with proper recline angle
is achieved. Continue with installation instructions from step 7 on
page 20.