User guide

38
7 Adjust the infant carrier
handle to any locked position.
8 Verify that all connections are
secure. Check that:
9 The vehicle belt is not twisted.
9 The vehicle belt is tight and locked.
* Check that the vehicle belt retractor is locked or,
* Check that the latch plate is locked or,
* Ensure that a locking clip has been properly installed.
9 The infant carrier handle is rotated into any locked position.
9 The infant carrier is secure.
* If the infant carrier can be moved more than 1 in. (2.5 cm) front-to-back
or side-to-side at the vehicle belt path, repeat installation or choose
another seating location.
9 Check the recline angle. 10 The proper recline angle
is achieved when the level
indicators on the infant carrier
are within the level lines.
* The vehicle should be parked
on a level surface.
NOTE: It may be necessary to install the infant carrier more than once to
achieve the proper recline angle.
Installing Your Infant Carrier without Base