User guide

40
Non-Locking Lap-Shoulder Belt Installation Using a
Locking Clip
IMPORTANT: When installing this restraint using a non-locking vehicle
belt, a locking clip must be used. Refer to your vehicle owner’s manual
for instructions on correct use of vehicle belts with child seats.
Before You Begin:
9 Ensure you have a locking clip.
Contact Britax Consumer Services at
1.888.427.4829 to obtain a locking
clip.
9 Secure child in carrier before
installing carrier in vehicle
1
Place the infant carrier rear-facing
on the vehicle seat.
2 Pull the vehicle belt out and route
the lap part of the vehicle belt
through the first belt guide.
* Do not route the shoulder part of
the vehicle belt through the belt
guides.
Installing Your Infant Carrier without Base
Carrier Installation with a Non-
Locking Lap-Shoulder Belt