Instruction manual

HOW TO INSTALL
40
PLACING CHILD IN THE RESTRAINT
A. Lengthen harness by pushing and holding the
Harness Adjustment button while pulling on either
shoulder strap until the harness will accommodate the
child. Release harness adjustment button when there
is enough slack and place harness straps on each side
of the seat.
B. Place child in the restraint and feed each arm through
shoulder straps. Pull harness buckle up between child’s
legs.
C. Fit either harness tongue into the
harness buckle followed by the other
tongue until a click is heard. Should
the second tongue not insert press the
red button and reinsert the tongues.
Ensure secure engagement by pulling
harness straps.
Adjuster Strap
Pull to lengthen
Push Harness
Adjustment
Button
HOW TO INSTALL
41
TO REMOVE CHILD
Press red button on Harness Buckle then both Harness tongues will be released. Lift the shoulder
straps from the child’s shoulders.
D. Ensure all slack is removed from
harness lap straps by pulling shoulder
straps, then pull harness adjustment strap
to adjust harness to a comfortable but
rmt.Checkthattheslackinstrapsis
removed. Shoulder Harness Straps must
trmlytothechild.Alooseharness
could result in serious injury in an
accident.
Do not use restraint if straps do not
tighten and contact your local authorised
service agent for repair.
CAUTION:
A LOOSE HARNESS IS DANGEROUS.
Harness Lap Straps
Shoulder Straps
Crotch Straps
Pull to remove
slack from
harness lap
straps
A
B
Pull to
tighten
Click
Tongue
Buckle
C
D
D