Instruction manual

52
53
Consultthevehicleowner’shandbookforlocationofanchoragettingsoranchoragepointsandthe
possibleuseofspacers.Somevehiclesmayhaveananchorttingttedbythevehiclemanufacturer.
Ifanchoragepointscannotbefoundrefertocarmanufacturerorlocalchildrestraintttingstationor
trafcauthorityforoptimumpositionofanchoragepointandtheuseofspacers.
UPPER ANCHORAGE STRAP
IMPORTANT:
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS THE RISK OF INCORRECT
FITMENT OF THE ATTACHMENT CLIP TO THE ANCHOR FITTING. ALWAYS ENSURE THAT THE
ATTACHMENT CLIP IS CORRECTLY ENGAGED TO THE ANCHOR FITTING AND NOT HOOKED OR
FITTED TO ANY OTHER OBJECT BEFORE EACH USE OF THE RESTRAINT. THIS IS ESPECIALLY
IMPORTANT IN VEHICLES SUCH AS STATION WAGONS, VANS, HATCH BACKS OR VEHICLES
WITHOUT A FIXED PARCEL SHELF, SINCE THE ANCHOR POINT IS USUALLY NOT VISIBLE.
IMPORTANT INSTALLATION NOTE:
Insomevehiclestheanchorttingintherearverticalpanelcanonlybeinstalledinoneway.Please
refertovehicleowner’shandbookorachildrestraintttingstationforcorrectmethod.
Extension Strap distance to be measured.
Length 300mm (Use Safe-n-Sound part 0035).
Length 600mm (Use Safe-n-Sound part 0036).
Available from all major child restraint retailers.
DISTANCE TO MEASURE TO THE
ANCHOR POINT
Anchorage Clip Cover
Theshadedareasofthisdiagramillustratethepossiblelocationsoftheanchortting.Withineach
shadedareaisananchorttingshowingthecorrectwaytoinstallthetting.Ensuretheanchortting
is aligned as illustrated unless stated otherwise in the vehicle owner’s handbook.
Adjustable upper
Anchorage strap.
Front of Vehicle
45°
PRE-INSTALLATION ANCHOR FITTING PRE-INSTALLATION ANCHOR FITTING