User guide

10
11
Switchable Retractor in ALR with Sliding Latch Plate3.
Has a latch plate that freely a
slides along the vehicle belt
webbing.
Has a retractor that can be b
switched to function as an ELR
or an ALR by pulling the vehicle
belt fully out until a clicking
sound can be heard when
retracting.
To use a child seat with this type *
of vehicle belt, you will need to
switch to the ALR mode or use
child seat lock-offs.
Compatible Vehicle Seat Belts
NOTE: The information in this section only applies to installation with
vehicle safety belts.
Vehicle seats and safety belts differ from vehicle to vehicle. Refer to your
vehicle owner’s manual for specific information about your vehicle safety
belts and their use with child seats.
Lap-Shoulder (3-Point) Belt
ALR (Automatic Locking Retractor) with Sliding Latch Plate
1.
Has a latch plate that freely a
slides along the vehicle belt
webbing.
Has a retractor that stops the b
belt from being pulled out again
once the belt webbing has been
pulled out at least 24 in. (61 cm).
Tightens by feeding the belt c
webbing back into the retractor.
ELR (Emergency Locking Retractor) with Locking Latch Plate
2.
Has a latch plate that does a
not allow the lap part of the
belt to become loose after it is
buckled.
Has a retractor that locks only b
in an emergency situation such
as sudden stop or crash.
Latch
Plate
Latch
Plate
Latch Plate
Vehicle Compatibility Vehicle Compatibility