User guide

42 43
BRITAX Child Safety, Inc. ADVOCATE CLICKTIGHT User Guide
7. Route the harness straps
through the seat to the
back. Ensure that the
harness straps pass over
the tube.
8. Nest the end of the left
harness strap into the
right.
9. Slide the harness straps
completely onto the yoke.
Ensure that the adjuster
and harness straps are
not twisted and that
the ends of the harness
straps are securely
attached to the yoke.
TUBE
Shell
and Side
Impact
Cushions
• SPONGE CLEAN
the shell using warm
water and mild soap.
• TOWEL DRY
DO NOT
• Use abrasive
cleaners.
Prevent the Side Impact Cushions from being punctured.
Puncture damage will cause the cushions not to perform
as intended.
Cover • HAND WASH the
cover using cold
water and mild soap.
• LINE DRY to prevent
the cover from
shrinking.
DO NOT
• Bleach
• Machine wash
• Machine dry
• Iron
Harness • SPONGE CLEAN the
harness using warm
water and mild soap.
• TOWEL DRY
DO NOT
• Disassemble the
harness
• Bleach
• Machine wash
• Machine dry
• Iron
Harness
Buckle
• THOROUGHLY
RINSE the buckle
using warm water.
• TEST THE BUCKLE
by fastening and
unfastening until a
click is heard after
inserting each buckle
tongue. If clicks are
not heard, repeat the
cleaning procedure.
• TOWEL DRY
DO NOT
• Soak
• Lubricate
• Use solvents
• Use soap or
household
detergents
Cleaning