Instruction manual

CARE AND MAINTENANCE

50 51

ACCESSORIES

IMPORTANT:

ONLY USE SAFE-N-SOUND SEAT COVERS AND ACCESSORIES THAT ARE DESIGNED AND TESTED

FOR USE WITH THIS PRODUCT.

The following instructions apply to accessories that may be supplied with this restraint at point of

purchase. If not, a variety of accessories are available from various retailers of Safe-n-Sound products.

CANOPY

A. Attach the elastic straps at the back of the canopy to

the hooks at the rear of the restraint.

B. Attach together the press studs on the ends of the

hood on the sides of the trim.

C. Pass hook and loop strap through loop attached to the

hood.

Hooks

Press stud

TO REPLACE INFANT SAFETY CUSHION™INSERT

The Infant Safety Cushion™Insert is designed to

snugly support baby for extra support and comfort and

must be used for small babies when Rearward-Facing.

Discontinue use when the Infant Safety Cushion Insert

is tight t or creates discomfort for larger babies. Do

not use when in Forward-Facing mode.

A. Disconnect buckle and place insert under shoulder

and lap straps.

B. Attach hook and loops on both sides of Insert.

C. Feed the crotch strap through the ap in the Infant

Safety Cushion Insert and re-connect buckle.

D. Tuck the ap underneath the Infant Safety Cushion

Insert.

NOTE: Discontinue the use of Infant Safety Cushion

Insert once the child's shoulders each the Lower

shoulder Height Marker.

Hook

& Loop

Infant Safety

Cushion Insert

Flap

Pull crotch strap through ap and tuck

ap under Infant Safety Cushion Insert.

Hook and loop strap through

loop attached to the hood.