User manual

Forward Facing Lap Belt
Installation
Figure A illustrates a typical lap belt only
seat belt system.
1 Place the child restraint forward facing
on the vehicle seat.
2 If stabilizing bar is extended press blue
release button, located adjacent to the
right side rear facing lock-off, to release
and store bar. ( fig. B) .
3 Pass the seat belt through both side
slots, then fasten the seat belt and verify
that it is not twisted (f ig. C) .
4 Before continuing, make sure that the
lap belt passes under BOTH lap belt posi-
tioning guides (fig. D).
NOTE: Forward facing installation is
improved by the use of the Versa-Tether
™
,
but is not required.
Installation: Forward Facing
B
A
D
C
22
FAGalaxy_page proof 2/9/02 11:17 AM Page 22