User manual

Versa-Tether
TM
NEVER ATTACH A FORWARD FACING TETHER TO A LOCATION
THAT IS NOT RECOMMENDED BY YOUR VEHICLE MANUFAC-
TURER OR TO A LOCATION THAT YOU BELIEVE IS INCORRECT
OR NOT STRONG ENOUGH. IF THE TETHER ANCHOR COMES
LOOSE IN A CRASH, THE METAL HOOK CAN INJURE VEHICLE
OCCUPANTS.
• Britax recommends that the tether be used at all times. Using
the tether will improve the stability of your child restraint and
reduce the risk of injury.
• If your vehicle does not currently have a tether anchor
attachment refer to your vehicle owner’s manual or contact
your vehicle manufacturer for assistance.
• If a tether anchorage is not available, you should NOT modify
your vehicle without advice from your vehicle manufacturer.
Forward Facing Versa-Tether
1 Once your child restraint is in a secure, seat belted position, facing
forward, locate the tether and remove from pouch.
2 Push the adjuster button, then pull to fully extend tether.
3 Locate the tether anchor in your vehicle. Use a tether anchor in
location a or b in the illustration on page 26.
IMPORTANT: If in doubt about your tether anchorage point or if your
vehicle is not equipped with a tether anchorage point, c heck your
vehicle owner’s manual or contact your vehicle manufacturer for
assistance.
25
FAGalaxy_page proof 2/9/02 11:17 AM Page 25